© Weld Tooling Corp.
Self Guided Cutting and Welding Systems
 |
The BUG-GY Fillet Welder is a trackless, self-guiding welding carriage designed for making continuous or intermittent welds on fillet, lap, or butt joints. It is a lightweight, portable carriage that uses a powerful electro magnet and guide wheels to clamp and track on the work piece. |
 |
The BUG-GY-VERT is a portable, battery powered, 4-wheel drive welding carriage with torch oscillation. Strong permanent magnets hold the machine on the workpiece allowing it to travel on vertical or oblique surfaces. |
 |
The UNI-BUG II will carry a cutting torch or welding gun into tight work areas or around very tight curves without the use of a track. The UNI-BUG II can weld or cut both straight lines and radii as small as 6" (1152mm). |
 |
The UNI-BUG III will make continuous or intermittent stitch welds. The machine will mount and run directly on the work piece. Each carriage is designed to fit on a specific steel profile. |
 |
The STIFFENER WELDER (with Lincoln feeders) is a self contained, dual head welding travel carriage with integrated wire feeders and spool mounts. It will produce continuous or programmable imtermittent fillet welds on stiffeners with heights of 3"-16" (75-400mm) and widths up to 12" (0-300mm). |
 |
The STIFFENER WELDER (with Miller feeders) is a self contained, dual head welding travel carriage with integrated wire feeders and spool mounts. It will produce continuous or programmable imtermittent fillet welds on stiffeners with heights of 4" to 18" (102-457mm) and widths of 4" to 12" (102-305mm). |
 |
The MINI-VERT is held on the workpiece with strong permanent magnets. It will travel and carry a welding gun in flat or vertical positions producing continuous uniform fillet welds. |