Home Products Circle Welders/Burners with Rise & Fall Cam

Circle Welders/Burners with Rise & Fall Cam

Circle Welders/Burners with Rise & Fall Cam

Bug-O Automatic Circle Burners cut square or beveled holes in lightweight pipe or vessels. Our Automatic Circle Welders are designed for single or multipass welding of couplings or nozzles on pipe and vessels. No hose or cable wrap up regardless of direction of rotation.

CW-5AX Circle Welder

The CW-5AX Circle Welder is designed for single pass or multi pass welding of couplings and nozzles on pipe and vessels. The unit is available for Sub Arc, MIG or Flux Cored process. The CW-5AX offers all the same features as the CW-5 as well as a meter kit, torch angle adjuster and flux hopper.

LIST OF BROCHURES

LIST OF MANUALS

LIST OF TECHNICAL SHEETS

CW-5 Circle Welder

The CW-5 Circle Welder is designed for single or multipass welding of couplings or nozzles on pipe and vessels utilizing MIG or Flux Core process, with gas shield.

LIST OF BROCHURES

LIST OF MANUALS

LIST OF TECHNICAL SHEETS

CB-3 Circle Burner

The CB-3 Circle Burner also uses oxy-fuel for single pass, square or beveled hole cuts. Mounted on a column and boom, manipulator or fixture, the CB-3 is designed for use on vessels, large diameter pipe, domed heads and flat plate.

LIST OF BROCHURES

LIST OF MANUALS

LIST OF TECHNICAL SHEETS

CB-2 Circle Burner

The CB-2 Circle Burner uses oxy-fuel for square or beveled hole cuts using a single cutting pass. The CB-2 is mounted on a special frame with a releasable permanent magnet base specially designed for use on vessels and large diameter pipe.

LIST OF BROCHURES

LIST OF MANUALS

LIST OF TECHNICAL SHEETS

YOUTUBE LINKS

CB-1P Plasma Circle Burner

The CB-1P Plasma Circle Burner is for cutting beveled holes in light wall pipe or vessels with wall thicknesses up to 3/8" (7 mm). This machine is supplied with a Thermal Dynamics air plasma power source, torch and 50' (15 m) leads. The unit operates on 220/50-60/1 power (3 phase also available). The CB-1P must be mounted on a carriage or fixture.

LIST OF BROCHURES

LIST OF MANUALS

LIST OF TECHNICAL SHEETS

YOUTUBE LINKS

CW-5 Circle Welder w/Remote

The CW-5 Circle Welder with Remote Control is designed for single or multipass welding of couplings or nozzles on pipe and vessels utilizing MIG or Flux Core process, with gas shield. The machine is equipped with its own wire feeder, rotation drive motor, rise and fall cam assembly and welding gun. Horizontal and vertical racking to position the torch and a 30 lb (14 kg) spool holder.

LIST OF BROCHURES

LIST OF MANUALS

LIST OF TECHNICAL SHEETS

YOUTUBE LINKS

CW-18 Circle Welder

The CW-18 Circle Welder is designed for welding of nozzles into vessels or domed heads utilizing SUB-ARC. The CW-18 mounts on a 3-Jaw Chuck welding diameter 6" to 50" (152-1270 mm) O.D. It is capable of using welding wire diameters 3/32-7/32" (2.4-5.6 mm).

LIST OF BROCHURES

LIST OF MANUALS

LIST OF TECHNICAL SHEETS

YOUTUBE LINKS

CW-11 Circle Welder

The CW-11 Circle Welder is equipped for MIG, Flux Core and Sub Arc welding on large vessels, domed heads and flat surfaces. The CW-11 has a working range of 10"-50" (254- 1270 mm) O.D. nozzles with no cable wrap up for multi-pass welding. Remote control of amps and volts. The unit is capable of using welding wire diameters from .035"-3/32" (.8-3.0mm).

LIST OF BROCHURES

LIST OF MANUALS

LIST OF TECHNICAL SHEETS

CW-7 Circle Welder

The CW-7 Circle Welder is equipped for MIG, Flux Core and Sub Arc welding on vessels and domed heads. The CW-7 has a working range of 6"-24" (152-610 mm) O.D. nozzles with no cable wrap up for multi-pass welding. This unit is capable of using welding wire sizes from .035"-3/32" (.8-2.4 mm).

LIST OF BROCHURES

LIST OF MANUALS

LIST OF TECHNICAL SHEETS

YOUTUBE LINKS